Lake Wales sits on rolling ridge land, and a fence here has to handle hills, loose sand and summer storms. Lakeland Fence Company installs wood, vinyl, aluminum and chain link fences built for those conditions, with free visits and written quotes.
Lake Wales stands on some of the highest ground in peninsular Florida, so many yards slope instead of lying flat. A fence on a slope can step down in level sections or follow the grade in one smooth line. We pick the method that fits your lot and your style.
Slopes also push water toward the low end of a fence. We leave room for runoff to pass and set the lowest posts deep enough to stay put. Show us where the water runs after a storm, and we will plan around it.
Lake Wales sits on the Lake Wales Ridge, a sandy upland that drains fast and holds very little together. Loose sand gives a post less to grip, so a thin footing can lean over time. That is why we never treat a fence here like one built on firm clay.
We dig each hole to the depth that the fence height and wind load call for, then pour concrete on site. Solid panels act like sails in a storm, so tall privacy fences get the largest footings.
This city has taken hurricane winds more than once, including in 2004 and 2017. A well set post costs far less than a rebuild, and it is the best protection a fence can have.
Many homes near downtown Lake Wales were built long before today’s fence styles existed. A plain vinyl panel can look out of place against an older porch and brick or stucco walls. Aluminum with a simple picket top, or a painted wood fence with clean lines, tends to sit better. We bring sample styles to the visit so you can judge them against your house.
Older lots also hide surprises. Tree roots, old footings, buried lines and unclear property markers all show up once digging starts. We look at the lot closely, ask for your survey, and tell you what we see before we give a price. If an old fence needs to come out, that work goes into the written quote.
A fence in Lake Wales may need a permit, and the office that issues it depends on where your property sits. Addresses inside the city go through the City of Lake Wales. Addresses outside city limits go through Polk County, which lists permits for masonry walls and solid fences over 8 feet.
Height, placement and corner lot rules can vary, so we confirm them for your address before we build. We prepare the application, follow it, and schedule the work once it is approved. If you live in an HOA, we also match the fence to your community rules.
Florida law sets the minimum for a home pool barrier. It must be at least 4 feet high on the outside, and any gate has to open outward and close and latch by itself. The latch must sit where a young child cannot reach it.
Aluminum is a common pick for pool fences because you can see the water through it and it does not rust. We place the gate to swing away from the pool and check each latch during the final walkthrough. The state allows other safety features too, so ask your building department what applies to your pool.
Tell us about your property and we will come take a look. We measure the fence line, check the slope and soil, and explain your choices in plain words. You receive a written quote with no hidden fees and a timeline for the work. Call (863) 248-4257 or use the contact form, and we will respond within one business day. We are in the office Monday to Friday, 8:00 to 5:00.
Installed a commercial-grade chain link perimeter fence for a warehouse in Lake Wales’ industrial corridor. The 6-foot, 9-gauge galvanized system provides durable, low-maintenance security that protects inventory and controls access without disrupting daily logistics operations.
Project cost: $18,500
Installed a welded wire fence for a property owner in Lake Wales’ industrial yards. The heavy-duty welded mesh delivers the right balance of strength, visibility, and a clean professional appearance, securing the perimeter while maintaining clear sightlines for oversight.
Project cost: $12,000
Installed an ornamental steel fence for a business near Lake Wales’ office campus. The attractive design strengthens curb appeal and establishes a polished, professional perimeter while serving as a visible security deterrent suited to commercial environments.
Project cost: $14,500
Upcoming chain link enclosure at a retail lot in Lake Wales’ commercial district. This dependable, low-maintenance solution will secure the property and define clear boundaries while keeping long-term costs manageable for the retail operator.
Project cost: $16,800
HAVE QUESTIONS?
Everything you need to know before getting started. Can’t find your answer? Contact us — we’re happy to help.
Yes. Vinyl resists rot and termites and needs no paint, and UV inhibitors help it keep its color. A hose rinse handles most cleaning. In a storm, post depth matters more than panel material, so we set every post in concrete and size the footing for the fence height.
Inside city limits the permit comes from the City of Lake Wales, and outside city limits it comes from Polk County. We check your parcel first, then prepare and submit the application. You sign what we need from you, and we keep you updated until the permit is approved.
Yes. Florida’s pool safety law says gates must open outward, away from the pool, and be self closing and self latching. The release must be placed so a young child cannot reach it. We build pool gates to that rule, and we test the latch before we finish.
We schedule the work after the permit is approved and give you the timeline in writing. Most residential fences take 1 to 3 days on site, depending on yard size and the number of gates. Hills and tree roots can add time, and we tell you that up front.
We serve Lake Wales and nearby Polk County towns within a 60 minute drive of Lakeland. That includes Haines City, Davenport, Bartow, Winter Haven and Auburndale. If you are on the edge of that area, call us and we will tell you if we can reach you.
